Converse of object

• use: The requirements for testing using the cylindrical mandrel are the same as the conical mandrel in terms of dimensions.

• have: It should have a hollow mandrel and at least a number two Morse taper socket in the nose for holding centers and other tooling.

Adjective modifier

• conical: This provides a more severe test than the 3.2 mm minimum diameter of the conical mandrel.

• cylindrical: The ASTM equipment consists of a series of cylindrical metal mandrels mounted in a frame.

• hollow: It should have a hollow mandrel and at least a number two Morse taper socket in the nose for holding centers and other tooling.

• flat: PEF components are generally produced on a flat metal mandrel which is cleaned and coated with light sensitive photo resist.

Modifies a noun

• bent: An improvement over our old design, mandrel bent on CNC benders for smooth perfect bends without joints making it unique for this application.

• screwdriver: The use of threaded mandrel screwdriver tools, as for plain mandrel screwdrivers, is also limited to free running reduced diameter inserts.

• diameter: A total of 12 mandrel diameters are specified ranging from 2 to 32 mm.

• test: ASTM D 522 In order to carry out the conical mandrel test, we need 3 coated panels for each coating.

Noun used with modifier

• metal: The resist on the unexposed area of the metal mandrel is developed away to produce a matrix.

• steel: There is also a winder which is a rubber disk which fits on the cordless drill by means of a stainless steel mandrel.

• diameter: The uniquely designed silencer and large diameter mandrel bent piping reduce all unnecessary back pressure, resulting in unparalleled power gains.