Converse of object

• have: Rim, largely missing, turns outwards and has slight internal bevel.

• keep: In this case the turner may have to apply some downward force in order to keep the bevel in contact with the wood.

• apply: Bevel Options By applying bevels, you can to add depth to flat objects.

• use: Charlesworth explains why he uses a bevel that has three angles on it.

Adjective modifier

• high: These two features operate independently, i.e. it's possible to have a high precision bevel but low Object Quality, and vice-versa.

• small: Steering is by a small bevel at the base of the column to a bevel operating the steering arm.

• inner: The case is PSP7 fine leather, with an inner bevel.

• flat: The blade has a flat bevel and is easy to sharpen using a Japanese Water Stone.

• straight: Because there is not spiral angle and no additional developed thrust these gears can be used as direct replacements for straight bevel gears.

Modifies a noun

• pinion: Among the pieces missing was the lower spiral bevel pinion.

• rubbing: Gouge A cutting tool with a ' U ' shaped cross-section used with the bevel rubbing.

• gearbox: Studies of many applications covered by our bevel gearboxes have been taken into account in the design of the new PowerGear range.

• gear: A bevel gear cast in 8 sections was also installed to carry drive power through to the first floor.

• angle: In addition, the bevel angles were not the same on both sides of the knife.

• edge: Modern hardened steel bevel edge blades can be struck with a mallet, making them a good general purpose tool.

Noun used with modifier

• spiral: Fortunately I had already ordered three sets of these spiral bevels to be cut from the blanks I supplied.

• edge: Blade fragment, edge bevel well defined 4.5mm away from blade edge on one side.

• angle: On the opposite side of the stick there are 45° angle bevels and the second head is cut straight.

• rubbing: Diagram 13.2 The rubbing bevel 13.5 The first cut The first cut is the easiest one.

• sax: Mark the sax bevels for every rigger position ( they often vary from side to side and along the boat ).