Converse of object

• toughen: When using toughened glassy adhesives, rods with a reduced diameter section at the bonding faces are used.

• cure: The cured adhesive must then have sufficient strength to hold the device to the board during the solder wave process.

Adjective modifier

• conductive: Electrically conductive adhesives with low melting points could provide many users with an acceptable solder replacement for these assemblies.

• epoxy: The specimens were bonded to the loading blocks using a room temperature two part epoxy adhesive.

• cement-based: It seems that cement-based adhesive is best for exterior work.

• rubber-toughened: This has been used recently to produce a cavitation model for rubber-toughened adhesives with some success.

• pressure-sensitive: Pressure-sensitive adhesives are used on tapes or sheet material, sometimes with a nonstick backing paper.

• thermoplastic: The BLP uses a face-down chip, with the lead-frame attached by thermoplastic adhesive, and is bonded with gold wire before being transfer-moulded.

Modifies a noun

• capsulitis: The medical name for frozen shoulder is adhesive capsulitis.

• dressing: Care should also be taken when removing compression hosiery and adhesive dressings, so as not to damage the skin.

• tape: Use adhesive tape to hold the pieces together, wiping off surplus glue.

• bandage: For birds we suggest the addition of a cohesive bandage, we find these ideal for wrapping birds instead of adhesive bandages.

• plaster: The process involves placing chemicals on the animals ' raw, shaved skin and covering the skin with adhesive plaster.

• pad: The badges come with a self adhesive pad on the reverse for easy fitting.

Noun used with modifier

• floorcovering: ARDEX AF 2300 is a single part, water-based, low odor and solvent free, rubber floorcovering adhesive with exceptionally high yield.

• tile: Flexible tile adhesive directly on top of the heating mat.

• self: I used self adhesive Velcro to fix in place.

• silicone: The spikes can be glued onto window cills, pipes or ledges using a building grade silicone adhesive.

• resin: MDF is made by bonding fine wood fibers under pressure using a resin adhesive.

• wallpaper: Whatever you're doing next, you'll need to remove all traces of wallpaper adhesive for a good finish.